Wheel Cap Replacement (20", 22", And 24" Models) - decon E-Drive PLUS Service Manual

4.5. Wheel Cap Replacement (20", 22", and 24" Models)

4.5.1. Removal
Required tools: Slotted screwdriver
Read the entire replacement procedure and all of the notices, and then perform
the replacement following the order in the instructions.
(1) Wheel Cap Removal
1
Unfold the wheelchair, place it on a level
surface, and engage the parking brake.
2
Insert a slotted screwdriver slightly into the
gap between the hub and the wheel cap.
3
Widen the gap of the wheel cap with the
slotted screwdriver.
4
Insert the other screwdriver further into the
widened gap.
4
5
Move the screwdrivers to remove the wheel
cap.
44
(2 medium-sized screwdrivers)