Table of Contents
Advertisement
6.2. Driving Parameters ~Preset Mode~ Setting Method
Relationship between the Free Mode and Preset Modes
The preset modes are modes in which each of the parameters configurable in the Free Mode
have been pre-configured, so that they can be easily switched.
Preset Selection
Forward Speed
Backward Speed
Turning Speed
Straight-line Acceleration
Straight-line Deceleration
Turning Acceleration/Deceleration
Joystick Valid Range
Joystick Filter
Torque Limit
Joystick Dead Zone
Joystick Input Direction Selection
Purpose of Operation
[Preparation]
[1]
Prepare to set the
parameters.
[Start Operation]
[2]
Start setting the param-
eters.
Soft Mode
2 (Medium Speed)
3 (High Speed)
2 (Medium Speed)
1 (Slow)
3 (Quick)
1 (Slow)
3 (Wide)
3 (Standard)
3 (No Limit)
2 (Standard)
1 (Normal)
Operation Method
Horn switch
Speed switch
Power switch
Setting in Preset Mode
Standard Mode
4 (High Speed)
3 (High Speed)
2 (Medium Speed)
2 (Standard)
2 (Standard 20", 22", 24" Models)
3 (Quick
16" Model)
2 (Standard)
3 (Wide)
3 (Standard)
3 (No Limit)
2 (Standard)
1 (Normal)
Stop the wheelchair in a stable
state, engage the parking brake,
and power OFF.
With the speed switch raised, turn
on the power switch while pushing
the horn switch.
The entire LCD will light up for
approximately 1 second, and you
will hear a long buzzer.
Once the buzzer beeps, release
your hand from the switch.
Sports Mode
4 (High Speed)
3 (High Speed)
3 (High Speed)
3 (Quick)
3 (Quick)
3 (Quick)
3 (Wide)
3 (Standard)
3 (No Limit)
2 (Standard)
1 (Normal)
Parameter Status during Operation
and Its Meaning
Off
All lit
Parameter that is currently being set
blinks
6
63
Advertisement
Table of Contents
