Table of Contents
Advertisement
6.5. Method for Restoring Factory Settings
Purpose of Operation
[Preparation]
Prepare to restore the
[1]
parameters to their factory
settings.
[Setting Operation]
This operation resets the
[2]
driving and function param-
eters to their factory
settings.
[3] [Restart]
Operation Method
Horn switch
Speed switch
Power switch
Stop the wheelchair in a stable
state, engage the parking brake,
and power OFF.
With the speed switch lowered, turn
on the power switch while pushing
the horn switch.
The entire LCD will light up for
approximately 1 second, and you
will hear a long buzzer.
Once the buzzer beeps, release
your hand from the switch.
The driving and function parameters
have now been restored to their
factory settings.
Turn off the power, and then turn it
back on. You will hear a short
buzzer.
This is the same as when the power
is normally turned on.
The settings are now the same as
the settings at the time of shipping
from the factory.
Parameter Status during Operation
and Its Meaning
Off
All lit
6
77
Advertisement
Table of Contents
