Table of Contents
Advertisement
10.4. Smart Tune Settings
The Function parameters and Drive parameters of E-Move can be changed to fit the usage. These chang-
es are performed by Smart Tune software. Consult with your dealer on changing the settings.
(1)
Function Parameters
Auto power off function
Selection of the turn off the power after a specified time of non- operation.
5 minutes (default), 10 minutes, 60 minutes or invalidate the auto-turn-off.
‚ Buzzer sound
This function changes the buzzer sound on (default) and off. It is impossible to disable the alert sounds.
ƒ Switch brightness
This function changes the switch light brightness.
'Bright'(default), 'Starts bright and turns off', 'Starts bright and turns dark' or 'Starts bright and
turns slightly dark'
„ Mode switch setting
Selection to use or not use the Mode switch
(2)
Driving Parameters
The Driving Parameters such as assist power ratio, left/right balance, etc. can be adjusted.
Assist motor power
Selection of 0 – 100% of the hand input power.
‚ Assist speed limit
Selection of 2 – 6 km/h of the assist top speed.
ƒ Left/right balance
Input/action sensibility selection. 0.6 – 2.6 left/right each
„ Straight/turn characteristics
Selection of 9 steps of turning characteristics.
… Coasting distance
Selection of 9 steps, 0.1 – 2.0 times of the standard coasting distance.
† Side slope assist
Selection of 7 steps of the side slope crossing assist level.
● When evaluating the need to change parameter settings, and choosing the actual changes,
consult the guidance of experts such as physical therapists and occupational therapists at
the dealer.
WARNING
10
83
Advertisement
Table of Contents
