TIENet™ 360 LaserFlow Ex™ Velocity Sensor
Section 4 Setup with 2160 LaserFlow Module
Figure 4-2 Activating connected sensors in Flowlink
4-2
A box is displayed, listing active and available TIENet Devices.
Click the "Scan" button to detect any newly connected
LaserFlow Ex or 350 Area Velocity sensors. Devices will appear
in the Available TIENet Devices pane.
Highlight the appropriate device(s) and click the "Add" button to
activate. Active TIENet devices will appear in the Active TIENet
Devices pane. Click the "OK" button.