Table of Contents
Advertisement
TIENet™ 360 LaserFlow Ex ™ Velocity Sensor
Safety
Hazard Severity Levels
vi
The LaserFlow Ex MUST be installed in
accordance with control drawing, in Figure 2-1
thru Figure 2-3 in this manual, and in accordance
with the requirements of the authority that has
jurisdiction for the installation of equipment in
hazardous areas at your specific installation site.
The certified control drawing details the only
approved method of installing the LaserFlow Ex.
Where specific ISCO part numbers appear, they
represent the only approved equipment certified
to be used with the LaserFlow Ex. Any equipment
substitutions or installations not specifically
detailed on the control drawing will automatically
void the intrinsically safe certification of the
LaserFlow Ex and could result in fire or
explosion!
This manual applies Hazard Severity Levels to the safety alerts,
These three levels are described in the sample alerts below.
Cautions identify a potential hazard, which if not avoided, may
result in minor or moderate injury. This category can also warn
you of unsafe practices, or conditions that may cause property
damage.
Warnings identify a potentially hazardous condition, which
if not avoided, could result in death or serious injury.
DANGER – limited to the most extreme situations
to identify an imminent hazard, which if not
avoided, will result in death or serious injury.
DANGER
CAUTION
WARNING
DANGER
Advertisement
Table of Contents
