Teledyne TIENet 360 LaserFlow Ex Installation And Operation Manual page 16

Velocity sensor
Hide thumbs Also See for TIENet 360 LaserFlow Ex:
Table of Contents

Advertisement

TIENet™ 360 LaserFlow Ex™ Velocity Sensor
Section 1 Introduction
Table 1-1 LaserFlow Ex Sensor Specifications
Level Measurement
Technology
Measurement Range
Accuracy @ 22 °C
Ultrasonic Temperature Coefficient
Ultrasonic Beam Angle
Ultrasonic Signal
Deadband
a. All specifications are subject to change without notice.
b. Custom cable lengths also available.
c.
Kynar® is a registered trademark of Arkema, Inc.
d. Deadband for 310 remote ultrasonic sensor varies due to the type of mounting hardware.
1-4
a
(Continued)
Non-Contact Ultrasonic Signal
0 to 3 m (0 to 10 ft) from measurement point
±0.006m (0.02 ft) at < 1ft level change;
±0.012m (0.04 ft) at > 1ft level change
± 0.0002 x D (m) per °C (± 0.00011 x D (ft) per °F)
(Where D is the distance from transducer to liquid surface)
10°
(5° from center line)
50KHz
Zero deadband from bottom of LaserFlow Ex sensor

Advertisement

Table of Contents
loading

Table of Contents