Table of Contents
Advertisement
Figure 2-9 Attach wired terminal strip to case board socket
Figure 2-10 Insert the cable reference tubing into the case board reference port
TIENet™ 360 LaserFlow Ex™ Velocity Sensor
Section 2 Preparation and Installation
5. (Optional) Insert the reference tubing into the REF AIR
port on the case board, pushing it down inside the silicon
tubing. Take precaution not to bend or kink the ref-
erence tubing.
6. Gently tug the cable downward to remove any slack within
the enclosure, taking care not to put any stress on the con-
nections.
2-11
Advertisement
Table of Contents
