System Installation; Introduction; Shipped Parts - Oracle Acme Packet 6100 Hardware Installation Manual

4

Introduction

Shipped Parts

Installation Tools
and Parts
Acme Packet 6100 Hardware Installation Guide
This chapter provides information about how to install the Acme Packet 6100
and its associated components, including cabling information.
Each Acme Packet 6100 ships in one box. Inside this box is the Acme Packet
6100 chassis and the accessory kit. The ordered NIU and power supplies are
already installed in the chassis.
Table 4 - 6. Acme Packet 6100 Shipping Contents
Location
Main Shipping Box Acme Packet 6100 chassis
Accessory Kit Console adapter
AC or DC power cords (one per power supply)
Grounding cable with lug
Slide rail mounting brackets kit
The following tools and parts are required to install the Acme Packet 6100 into
your equipment rack:
#1 Phillips-head screwdriver
•
#2 Phillips-head screwdriver
•
Small flat-head screwdriver
•
Rack and associated mounting hardware
•
Shielded Ethernet CAT5e or CAT6 RJ45 cables
•
11/32" nut driver
•

System Installation

Item
29