Media Cables - Oracle Acme Packet 6100 Hardware Installation Manual

SFP+ Identification

Media Cables

Cable
Identification
Acme Packet 6100 Hardware Installation Guide
Multi Mode (SX) — the label on the back of this SFP+ reads 850nm LASER
•
PROD. This transceiver features a black bale clasp latch.
Single Mode (LX) — the label on the back of this SFP+ reads 1310nm
•
LASER PROD. This transceiver features a blue bale clasp latch.
The multi mode SFP+ transceiver for the Acme Packet 6100 features a black
clasp latch.
Figure 6 - 116. 10 Gigabit Multi Mode SFP+ Transceiver (Black Bale Clasp Latch)
The single mode SFP+ transceiver for the Acme Packet 6100 features a blue
clasp latch. 
Figure 6 - 117. 10 Gigabit Single Mode SFP+ Transceiver (Blue Bale Clasp Latch)
This section describes the media signaling interface fiber optic cable types
used on the NIU. Each transceiver type (multi mode and single mode) are used
with a different fiber optic cable. The fiber optic cables only ship from Acme
Packet if you order them.
The following different 10 gigabit fiber optic cables are used on the Acme
Packet 6100 media cards:
79