Table of Contents
Advertisement
Unpacking the Acme
Packet 6100
Mounting Hardware
32
To unpack the Acme Packet 6100:
1.
Inspect the external packing materials and note if they are damaged in any
way.
2.
Open the exterior box.
3.
Unpack the contents of the Acme Packet 6100 shipment.
4.
Locate the packing list on the outside of the Acme Packet 6100 shipment
box.
5.
Confirm that all of the components listed in the packing list are present
and in good condition.
If you discover that any of the parts are missing or were damaged in
shipment, send an email to tac@acmepacket.com to request assistance.
The hardware used for the Acme Packet 6100 mounting procedures include the
following:
•
Front mounting flanges (2) for use with mounting slide rails, used to
secure the chassis into the rack
Figure 4 - 35. Front Mounting Flanges
•
Slide rail assembly (2), as shipped, with the chassis slide rail inserted
into the equipment rack slide rail.
Figure 4 - 36. Slide Rail Assembly
Acme Packet 6100 Hardware Installation Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the Acme Packet 6100 and is the answer not in the manual?