Alarms - Oracle Acme Packet 6100 Hardware Installation Manual

Alarms

Hardware and
Environmental
Alarms
Hardware
Temperature Alarm
Acme Packet 6100 Hardware Installation Guide
4. Reconnect the optical cables to their corresponding ports.
Figure 6 - 126. Reconnecting Optical Cables
The Acme Packet 6100 polls its hardware components to ensure they are
functioning properly. If it encounters a fault condition, it will report alarms in
these categories:
Hardware temperature
•
Fan speed
•
Environmental sensor
•
Power supply
•
Voltage
•
Physical interface cards
•
Each alarm is assigned a severity level, depending on the details of the fault.
Table 6 - 8. Descriptions of Alarm Severity Levels
Alarm Severity
Minor Functionality is impaired to a small degree (e.g., a single fan has failed)
Major Pending failures or unexpected events are imminent (e.g., an LOS)
Critical Catastrophic condition has occurred (e.g., the system is overheating)
This section provides details about hardware and environmental alarms.
The following table lists the hardware temperature alarm.
Description
83