Oracle Acme Packet 6100 Hardware Installation Manual page 92

Table 6 - 9. Hardware Temperature Alarm Information
Alarm
Alarm Name
ID
TEMPERATURE 65538
HIGH
If this alarm occurs, the Acme Packet 6100 turns the fan speed up to the fastest possible speed.
Fan Speed Alarms
Table 6 - 10. Fan Speed Alarm
Alarm
Alarm Name
ID
FAN STOPPED 65537
1. If the fan speed alarm occurs, the Acme Packet 6100 turns the fan speed up to the fastest possible speed.
2. The stated percentages are relative to the fan operating speed. Fan speeds adapt to the load as necessary.
Environmental Sensor
Alarm
Table 6 - 11. Environmental Sensor Alarm Information
Alarm
Alarm Name
ID
ENVIRONMENTAL 65539
SENSOR FAILURE
84
Alarm Severity
CRITICAL: >105°C Fans are obstructed
or stopped. The room
MAJOR: >100°C
is abnormally hot.
MINOR: >95°C
The following table lists the fan speed alarm.
1
Information
2
Alarm Severity
CRITICAL: any fan speed is operating at
<50%. Or speed of two or more fans are
operating at >50% and <75%.
MAJOR: speed of two or more fans is
operating at >75% and <90%. Or speed of
one fan is operating between >50% and
<75% and the other two fans are
atoperating at normal speed.
MINOR: speed of one fan is operating
between >75% and <90%, while the other
two fans are operating at normal speed.
The following table lists the environmental sensor alarm.
Alarm Severity
CRITICAL The environmental sen-
sor component cannot
detect fan speed and
temperature.
Causes Example Log Message
Temperature: XX.XXC
(where XX.XX is the
temperature in
degrees)
Causes
Fan failure. Fan speed: XXXX
XXXX XXXX
where xxxx xxxx
xxxx is the Revolu-
tions per Minute
(RPM) of each fan
on the fan module
Cause(s) Example Log Message
Hardware monitor fail-
ure! Unable to monitor
fan speed and tempera-
ture!
Graphic Display Window
Message
Temperature X C (where X
is the temperature in
degrees)
Example Log Graphic Display
Message Window Message
Fan stopped
Graphic Display
Window Message
HW Monitor Fail
Acme Packet 6100 Hardware Installation Guide