Oracle Acme Packet 6100 Hardware Installation Manual page 85

Acme Packet 6100 Hardware Installation Guide
4. Note the two flared guide rails that the NIU rides as it is inserted into the
Acme Packet 6100. The guide rails lead the NIU to engage with the bus
connector squarely.
Figure 6 - 112. Aligning the NIU Card with the Chassis Slot Guides
5. Slide the card into the Acme Packet 6100. The physical interface card
circuit board slides into the guide rails in the NIU bay of the system
chassis.
Figure 6 - 113. Installing the NIU
6. Continue sliding the card into the chassis until the ejection levers catch the
chassis. At this point, the ejection levers will start to fold inward as the NIU
is inserted into the chassis.
7. Fold both ejection levers inward toward the card to complete the
connection to the motherboard. Pushing the ejection levers inward draws
the physical interface card toward the system chassis and completes the
connection. The latches must engage to complete NIU insertion.
Figure 6 - 114. Locking the NIU to the Chassis
77