Instance 7 - Wieland samos PRO Manual

8.4.8.7

Instance 7

Attributes 1 to 50 of instance 7 represent the input data blocks 1 to 5 in samosPLAN 6 . They re-
present the data transferred by the PLC to the logic of the controller module.
Attributes 1 to 50 of instance 7 possess the same data as assembly instance 37, byte 0 to 49.
NOTICE You can find an explanation of the technical terms used below here: Abbreviations and Definitions
[ch. 1.5, p. 10]
Table 64: Overview of th vendor-specific object (Wieland Electric, 0x78), supported by the SP-COP2-ENI module
Class Instance Attribute
120 0 = Class 1
120 0 = Class 2
120 0 = Class 3
120 0 = Class 5
120 0 = Class 6
120 0 = Class 7
120 1 n+1
120 2 1
120 2 2 to 8
120 3 n+1
120 4 n+1
120 5 1
120 6 n
120 6 1
120 7 n+1
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
Access Data type Description
Read UINT Revision of the class
Read UINT Max. instance
Read UINT Number of instances
Read UINT[3] List of optional services
Read UINT Max. class attribute ID
Read UINT Max. instance attribute ID
The input byte "n", configured
Read USINT
by the output data set 1 in
samosPLAN 6 , stands for the
data transferred by the logic of
the controller module to the
PLC.
n = 0 to 49.
Read UDINT Project file CRC (data set 2)
Read UDINT Reserved (data set 2)
Read BYTE State byte "n" of the controller
module,
for which n = 0 to 59
Read BYTE Additional byte "n" of the con-
troller module,
for which n = 0 to 59
Read USINT SP-COP2-ENI System mode
(See [ch. 8.4.8.5, p. 94])
Read UDINT Error code in the controller
module,
with n = 1 for the most recently
occurred error, n = 2 for the
previous error, etc., with n = 1 to
5
Write UDINT Clear error list in instance 6
Write, BYTE Output bit "n", which is configu-
read red by the input data blocks 1
to 5 in samosPLAN 6 , stands for
the data transferred by the PLC
to the logic of the controller
module. n = 0 to 49.
EtherNet/IP gateway
Data range
1
4
4
{2, 0x4c, 0x4d}
7
60
0 to 255
0 to 2 -1
32
0
0 to 255
0
1, 2, 3, 4, 5, 7, 21
0 to 2 -1
32
0
0 to 255
95