Wieland samos PRO Manual page 36

Step 2: Removing gateways and expansion modules
 Deenergize the samosPRO system.
 Remove any plug-in terminals with wiring and remove the end terminals.
 Pull the modules apart from one another individually in the direction of the arrow until the late-
ral plug connection is disconnected.
 Unlock the module.
To do this, pull the snap-on foot of the module outward using a screwdriver.
 Fold the module away from the hat rail and remove it from the rail.
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
Installation and basic configuration
36