Wieland samos PRO Manual page 22

Data set 1
Byte 23 Input values for Module 12
Byte 24 Output values for Module 1
Byte 25 Output values for Module 2
Byte 26 Output values for Module 3
Byte 27 Output values for Module 4
Byte 28 Output values for Module 5
Byte 29 Output values for Module 6
Byte 30 Output values for Module 7
Byte 31 Output values for Module 8
Byte 32 Output values for Module 9
Byte 33 Output values for Module 10
Byte 34 Output values for Module 11
Byte 35 Output values for Module 12
Byte 36 Not allocated
...
Byte 47
Byte 48
Byte 49
Byte 50 Not available
Byte 51
Byte 52
...
Byte 55
Byte 56
Byte 57
Byte 58
Byte 59
Length 50 bytes
NOTICE
When two-channel input or output elements have been configured for an I/O module, only the
lowest bit constitutes the input or output state (on/off) for the corresponding element. It is re-
presented by the tag name of the element. The highest bit represents the state of this in-
put/output.
NOTICE
The input values in data set 1 do not represent the physical state at the input terminals, but the
pre-processed input values that are used for logic processing.
Table 12: Overview of data sets when analog input modules are used (alternative data set 1)
Data set 1
Byte 0 Input values for Module 0 (I1..I8)
Byte 1 Input values for Module 0 (I9..I16)
Byte 2 Input values for Module 0 (IQ1..IQ4)
Byte 3 Output values for Module 0 (Q1..Q4,
IQ1..IQ4)
Byte 4
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
Data set 2 Data set 3
State of Module 3
State of Module 4
State of Module 4
State of Module 4
State of Module 4
State of Module 5
State of Module 5
State of Module 5
State of Module 5
Not available State of Module 6
State of Module 6
State of Module 6
State of Module 6
State of Module 7
...
Status of Module 9
State of Module 10
State of Module 10
State of Module 10
State of Module 10
State of Module 11
...
Status of Module 11
State of Module 12
State of Module 12
State of Module 12
State of Module 12
32 bytes 60 bytes
Data set 2 Data set 3
Project CRC Module state SP-COPx
Module state SP-COPx
Test pulse comparison, controller
module inputs
Test pulse comparison, controller
module inputs
System CRC Test pulse comparison, controller
Product description
Data set 4
Reserved
60 bytes
Data set 4
Reserved
22