Wieland samos PRO Manual page 67

PROFINET IO-Gateway
Step 2: Add the gateway to the project
To make the system of the samosPRO system available in the process diagram of the PLC, the gate-
way must first be added to the hardware configuration. The procedure to be used depends on the
hardware configuration software of the PLC used. Please also read the documentation for the cor-
responding software in this regard.
The example below shows how the gateway is added to a SIEMENS TIA Portal project.
 Use Drag & Drop in the Network view to drag the device to the Ethernet PROFINET IO network.
Example:
Wieland Electric GmbH | BA000970 | 07/2019 [9855] 67