Wieland samos PRO Manual page 85

If an error occurs at the terminal input of a specific instance between 401 and 528 and the SP-COP2-
ENI module is in Run mode, the value of the instance attribute 4 equals 1. In all other cases, the va-
lue equals 0.
Table 43: Overview of the discrete input point objects (0x08) supported by the SP-COP2-ENI module
Class Instance Attribu-
te
8 0 = Class 1
8 0 = Class 2
8 0 = Class 3
8 0 = Class 6
8 0 = Class 7
8 1 to 400 and 1
529 to 584
8 401 to 528 1
8 1 to 528 2
8 529 to 584 2
8 1 to 400 3
8 1 to 400 4
8 401 to 416 3
8 401 to 416 4
8 417 to 420 3
8 417 to 420 4
8 421 to 430 3
8 431 3
8 432 3
8 421 to 432 4
8 425 + 8 x n 3
to
432 + 8 x n
8 425 + 8 x n 4
to
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
Access Data type Description
Read UINT Revision of the class
Read UINT Max. instance
Read UINT Number of instances
Read UINT Max. class attribute ID
Read UINT Max. instance attribute ID
Read USINT Number of attributes
Read USINT Number of attributes
Read USINT[4] List of support attributes
Read USINT[3] List of support attributes
Read BOOL The value of the input bit, configured
by the output data set 1 in samos-
PLAN 6 , stands for the data transferred
by the logic of the controller module to
the PLC.
State of output data set 1
Read BOOL
Read BOOL Value of terminals I1 to I16 of the SP-
COP2-ENI module
Read BOOL State of terminals I1 to I16 of the SP-
COP2-ENI module
Read BOOL Value of terminals IQ1 to IQ4 of the SP-
COP2-ENI module when configured as
an input
State of terminals IQ1 to IQ4 of the SP-
Read BOOL
COP2-ENI module when configured as
an input
Read BOOL Reserved
Read BOOL Value of B1
Read BOOL Value of B2
Read BOOL Reserved
Read BOOL Value of terminals I1 to I8 of the SP-
SDI[n] / SP-SDIO[n] module,
with n = 1 to 12
Read BOOL State of terminals I1 to I8 of the SP-
SDI[n] / SP-SDIO[n] module,
EtherNet/IP gateway
Data range
2
584
400 + 128 + 56
Logic + input +
output
7
4
3
4
{1, 2, 3, 4}
{1, 2, 3}
0 = Off,
1 = On
0 = OK
0, 1
0, 1
0, 1
0, 1
0
Voltage is...
0 = Outside
the tolerance
1 = Within the
tolerance
Voltage is...
0 = Outside
the tolerance
1 = Within the
tolerance
0
0, 1
0, 1
85