Wieland samos PRO Manual page 114

• Configuration of gateways with samosPLAN 6 [ch. 5, p. 39]
• Software manual
Allocating bytes to other addresses
samosPLAN 6 allocates the addresses by default. You can manually change this address allocation
by moving bytes.
In our example, we have shifted byte 1 to byte 23 in tab 1.
Step 1: Check target address
 Ensure that the desired address (byte 23 in our example) has not been allocated.
 When the target address is assigned here, delete the bytes placed there.
To do this, click on the byte in the work area and click on the Delete symbol in the command
bar.
Step 2: Delete byte from original address
 Delete the byte you wish to reallocated (byte 1 in our example).
To do this, click on the byte in the work area and click on the Delete symbol in the command
bar.
Step 3: Place byte on new target address
 Open the Gateway docking window and select the desired bytes under the associated module.
 Use the mouse button to drag the Byte into the work area on byte 23.
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
PROFIBUS DP gateway
114