Configuring The Gateway Output Values (Tab 1) - Wieland samos PRO Manual

Modbus TCP
Byte Preset allocation
35 Outputs for Module 12
36-47 Not allocated
48-49 Not allocated
The preset allocation of the bytes can be freely configured, as shown in the following section.
5.3

Configuring the gateway output values (tab 1)

80889739
You can use the following settings for the output values of a gateway in tab 1:
Basic setting
Depending on the gateway function selected, you will find four or eight bytes in tab 1, which are re-
served as direct gateway output values. You can also see these bytes in the Logic docking window.
Example: SP-CANopen module with eight predefined outputs for gateways:
"Logic" docking window
In the Logic docking window you
see these four bytes Outputs:
Change tag names of a predefined output value
Tag names have already been pre-assigned to the predefined output values (bytes). You can change
these tag names:
 In the Gateway view click on the byte, whose tag name you want to change.
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
Configuration of gateways with samosPLAN 6
PROFIBUS DP
Initial data set Preset allocation
Outputs for Module 12
Continued Not allocated
#1
(50 bytes)
Not allocated
"Gateway" view
In the Gateway view these four outputs appear in the first
tab:
Initial data
block
#4
(12 bytes)
#5
(2 bytes)
47