Wieland samos PRO Manual page 40

Illustration 1: Module configuration with gateway module
Scenario 2: You are using the gateway function on the module SP-COP2-ENI
You implement the gateway functionality via the controller module. In this case you must use the
SP-COP2-ENI module as the controller module for the controller and explicitly set the gateway func-
tionality there.
How to activate the gateway function on the SP-COP2-ENI module:
 Open the Modules docking window.
 Select the SP-COP2-ENI module.
 Open the Properties docking window.
 Select the desired gateway function from the Gateway selection list.
Illustration 2: SP-COP2-ENI module with activated gateway function
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
Configuration of gateways with samosPLAN 6
40