Wieland samos PRO Manual page 50

 Open the Properties docking window.
 If you wish to change the tag name of the byte:
Overwrite the pre-allocated tag name of the byte with the desired new value in the configurati-
on dialog.
 If you also want to change the tag names of individual bits:
Overwrite the pre-allocated values with the desired new value under Parameters in the confi-
guration dialog.
In the Logic view, these bits will appear with the corresponding tag names.
Configuring additional gateway input values
You can add new output values (bytes) in addition to the pre-allocated output values in the Gate-
way view.
 Click on an empty byte in the Gateway view.
 Open the Properties docking window and assign a tag name for the byte.
⇨ Tag names for all bits are automatically pre-allocated under Parameters.
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
Configuration of gateways with samosPLAN 6
50