Gateway" And "Properties" Docking Windows - Wieland samos PRO Manual

Illustration 5: "Gateway configuration" tab for SP-EN-MOD
NOTICE Allocation of input and output data
The output and input data listed here refer directly to the data blocks in tab 1 and tab 2.
• Output data group (to the PLC):
Only data set 1 can be configured. This refers directly to Output data block 1 in tab 1.
• Input data (from PLC) group:
Data set 1 to data set 5 refer directly to input data block 1 to input data block 5 in tab 2.
5.1.4

"Gateway" and "Properties" docking windows

81088011
In addition to the Gateway view, in the gateway configuration in samosPLAN 6 you work with the
following windows:
"Gateway" docking window
From the Gateway docking window you can drag hardware data bytes into empty cells in the rou-
ting table (Gateway view).
Illustration 6: Drag data bytes into the routing table using drag & drop
NOTICE
You can make use of the same data byte several times in the routing table.
"Properties" docking window
In the Properties docking window, the configuration dialog appears for the data byte which you ha-
ve selected in the Gateway view.
Depending on the data byte, you can configure individual parameters. You can also allocate tag na-
mes here.
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
Configuration of gateways with samosPLAN 6
44