Gateway" View - Wieland samos PRO Manual

"Gateway" view

5.1.2
81018379
If you have activated the gateway functionality in samosPLAN 6 automatically the Gateway view is
active. There you can edit the gateway configuration.
Setup
Depending on module configuration, in the Gateway view, you will see two or three tabs:
Module configuration
You use a gateway module
for gateway configuration
You are using the gateway
function of the SP-COP2-ENI
module
Visualization
• If you are using several gateways
The Gateway view always only shows one gateway configuration. If you are using several gate-
ways, you can toggle between the configurations by making use of the Select data set view
menu:
• When the program window is very small
If the window in which you have opened samosPLAN 6 is very small, not all tabs may be shown.
In this case an arrow symbol will appear, allowing you to toggle between the tabs:
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
Configuration of gateways with samosPLAN 6
Setup
In the Gateway view you see two tabs with the routing tables for the
input and output values.
Example: SP-EN-ETC module
In the Gateway view you see an additional third tab Gateway con-
figuration.
It contains the basic settings for the gateway function of the SP-
COP2-ENI module:
41