Wieland samos PRO Manual page 42

Commands
Via the command bar of the Gateway view, you have access to the following view-specific features:
Table 21: Key
Element
Also see about this
 Basic settings for the process data [➙ 45]
 Basic settings for the process data [➙ 45]
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
Configuration of gateways with samosPLAN 6
Description
Only with a connection to the controller:
Stops the controller.
Only with a connection to the controller:
Starts a stopped controller.
Zoom
This determines the size of the display in the Gateway view work area.
Undo
This renders the last action undone.
Redo
This makes an action that has been undone redone.
Standard
This resets the configuration of the gateways to the basic settings.
Also see: Basic settings for the process data [ch. 5.2.2, p. 45]
Data set view selection
When you are using several gateways: Changes between the gateway
configurations.
Importing/exporting
Allows for the import/export of the configuration defined in the Gate-
way view.
Notes:
• Caution: When you import a configuration, all changes made befo-
re that have not been saved will be lost. You cannot undo this
command.
• Available storage formats: SPG, XML, CSV
You can use the import/export function to import the tag names
used for a project into a PLC program, or to export them from a PLC
program into samosPLAN 6 .
Exporting the configuration for hmiPLAN
Only active for TCP gateway mode.
Exports the data points of the gateway configuration to a CSV file (file
format *hmiPLAN.CSV).
You can import this CSV file into the hmiPLAN software and use it there
to visualize machines and systems.
Delete
This deletes the currently selected element.
42