Profinet Configuration Of The Gateway - How The Data Are Transferred - Wieland samos PRO Manual

7.3

PROFINET configuration of the gateway - how the data are transferred

79157003
The following steps are required to configure the communication between the PLC and the gateway.
NOTICE
This documentation does not address the installation of the PROFINET IO network or the other
components of the automation system project in the network configuration tool. It is assumed that
the PROFINET project in the configuration program, e.g. the SIEMENS TIA Portal, has already been
set up. The examples presented are based on configurations created with the help of the SIEMENS
TIA Portal.
Step 1: Install the device master file (GDSML file)
Before the SP-COP2-ENI module can be used for the first time as part of the network configuration
tool, e.g. the SIEMENS TIA Portal, the device master file (GSDML file) of the gateway must first be in-
stalled in the hardware catalog of the tool.
 Download the GSDML file and the equipment symbol from the product site of the SP-COP2-ENI
module (https://eshop.wieland-electric.com/).
 Follow the instructions for the installation of GSD files in the online help section or in the user
manual for the PROFINET network configuration tool.
If you are using SIEMENS TIA Portal, then the SP-COP2-ENI module appears in the following location
in the hardware catalog:
Additional field devices > PROFINET IO > I/O > Wieland Electric > samosPRO COMPACT > Head
module > SP-COP2-ENI
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
PROFINET IO-Gateway
66