Wieland samos PRO Manual page 117

Table 79: Module numbers of the samosPRO system
Module num- Modules
ber
161 samosPRO SP-SCON
162 SP-SDI module, SP-SDIO module, SP-DIO module
163 PROFIBUS gateway (SP-PROFIBUS-DP)
164 CANopen gateway (SP-CANopen)
165 EtherCAT gateway (SP-EN-ETC)
166 Reserved
167 Reserved
168 Reserved
169 Reserved
170 Reserved
171 Controller module 1: 32-bit state
172 Controller module 2: 32-bit state
173 Controller module 3: 32-bit state
174 Unsafe I/O module
The following table shows the module-specific diagnostic data (as defined in the GSD) and the cor-
responding error messages.
Table 80: PROFIBUS error messages
Module num- Diagnosis bit
ber (X_Unit_Diag_Bit)
01 0
1
2
3
4
5
6
7
8 to 31
11, 12 and 13 0
1
2
3
4
5
6
7
8 to 95
2 0
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
Error cause Error message
Reserved Reserved
Module operating state is Critical Error.
Power supply not in permitted range
Reserved
Configuration of a module in the system is incompa-
tible or invalid
Power supply not in permitted range
Reserved
Communication error on EFI2
Reserved
Controller mo-
Reserved
dule
Module operating state is Critical Error.
Power supply not in permitted range
Reserved
Configuration of a module in the system is incompa-
tible
or invalid
Power supply at B1 not in permitted range
Fast shut-off collective error
Power supply at B2 not in permitted range
Description of bits 8 to 959: See Table "Meaning of
the module state bits" [ch. 3.3.5, p. 26]
I/O module Reserved
PROFIBUS DP gateway
117