Viewing Actual Values - GE 745 TRANSFORMER MANAGEMENT RELAY Instruction Manual

9 745 PC SOFTWARE
Checked boxes indicate that the user has visited the setpoint during this session.
The following example illustrates how any of the measured or monitored values can be displayed. In the follow-
ing example the winding currents are examined:
1. Select the Actual > Metering > Currents menu item.
2. 745PC displays the following dialog box detailing the winding currents. To view any of the currents avail-
able click on the desired tab shown at the top of the box. For example, to view the positive, negative and
zero sequence currents in any of the windings click on the Sequence tab.
GE Power Management
C he cke d b o xe s indicate th at th e u ser
h a s visite d th e se tpo int d urin g th is session .
Figure 9–14: 745PC ACTUAL VALUES WINDOW
745 Transformer Management Relay
9.3 USING 745PC

9.3.5 VIEWING ACTUAL VALUES

9
9-11