Holiday Navigator 2003 Owner's Manual page 81

Tips:
• Remember the location of the Valet/Program button.
• Know the number of Valet/Program button pulses for disarming.
• There is a 24 hour support number located on the back of the key fob.
• The headlights will only flash when using the Key Fob.
• The range of the remote key fob is about 1,200 feet.
Troubleshooting:
• Valet/Program not responding - Ensure the button is plugged into
the blue port of the receiver.
• Red Status LED doesn't work - Ensure the LED is plugged into
the correct socket.
• Shock Sensor won't trigger alarm - Ensure NPC system has not
triggered.
• System has no power - Ensure the 15 Amp fuse (front run panel)
is not blown.
• The system is not responding to the remote - Ensure the Valet
mode is not entered.
Changing the Programming - Entering the "Learn Routine:"
The following information is provided for changing the programming
features. It should be used only by an authorized service center.
1. Open the door.
2. Turn ignition ON, then OFF.
3. For menu selection: Press and hold the
Valet/Program button.
4. Select a feature.
5. Program a feature.
6. Release the Valet/Program button.
When the feature is programmed:
• Other features can be programmed
within the same menu.
• Another menu can be accessed.
• The learn routine can be exited.
To access another feature in the same menu:
• Press the Valet/Program button the number of
times necessary to advance to the desired feature.
• Press the Valet/Program button and HOLD.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
N A V I G A T O R 2 0 0 3
Driving & Safety
020048
020049
2 • 8 1