Cooktop - All Electric (Opt.); Care & Cleaning - Holiday Navigator 2003 Owner's Manual

Table of Contents

Advertisement

Appliances
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Care & Cleaning
COOKTOP - ALL ELECTRIC
(Optional)
4 • 1 5 2
Cleaning the cooktop is quick and easy. Regular cleaning with a soft cloth
and a warm detergent solution is generally enough to keep the cooktop clean.
Wash, rinse and dry with soft cloths. Clean the cooktop when it is cool. Use a
dry cloth or paper towel to clean spatters or spills when the surface is warm,
before it gets baked on. Glass cleaner sprayed on a paper towel should be used
for the cooktop surface. Do not spray glass cleaner directly on the surface.
DO NOT use abrasive cleaners or steel wool. Harsh cleansers like bleach,
ammonia and oven cleaner should NEVER be used. The surface burner grate
and caps should be cleaned using the same guidelines as the cooktop surface.
Porcelain Enamel:
Porcelain enamel is a type of glass fused on steel at a very high temperature. It
is not extremely delicate, but it must be treated as glass. Sharp blows, radical
surface temperature changes, etc., will cause enamel to chip or crack. Some
foods, such as vinegar, lemon juice, tomatoes and milk, contain acids which
can dull the finish of the enamel. To avoid dulling the finish, wipe up the spill
before it is baked on. Remember, the surface is glass and must be given
consideration when cleaning. Steel wool and course, gritty cleanser will
scratch or mar the surface. Any gentle kitchen cleanser powder or grease
cleaner will be suitable. For further information on care and maintenance of
the porcelain, call "Hopes Cultured Marble Polish" at 800-325-4026.
NOTE: All electric coaches require the appliance selector switch to
be in the cooktop position for operation.
N A V I G A T O R 2 0 0 3
The electric cooktop operates from
120 Volts AC supplied from either
shore power or the generator. The
appliance selector switch must be
placed in the cooktop position for the
cooktop to operate.
To Operate the Cooktop:
• Place appliance selector switch to
the cooktop position.
• Push down and rotate knob to the
desired heat setting.
• Red indicator lamp glows when a
knob is on.
030890

Advertisement

Table of Contents
loading

Table of Contents