Battery Temperature Sensor; Pass-Through Power; Meters Menu - Holiday Navigator 2003 Owner's Manual

Electrical Systems - House
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Battery Temperature
Sensor

Pass-through Power

Meters Menu

8 • 3 0 8
The inverter uses a battery temperature sensor to adjust charge voltage.
When battery temperature rises, the BTS sends this information, registering
as counts, to the inverter to decrease charge voltage. Voltage compensation
with temperature variation is necessary to keep the charge voltage at
optimum figures. The BTS should be adhered to a house battery. If the
BTS is unplugged, the inverter uses the default setting of 77º F/25º C as a
temperature reference point.
060085b
Incorporated in the inverter is a double pole "pass-through" relay that trips
when supplying AC power to the input terminals. This relay transfers AC
power through the inverter to the AC sub panel supplying power to outlets and
appliances. When AC power is supplied to the inverter, the internal battery
charger will "ramp up" battery charging voltage. A time delay allows pass
through AC power to the sub panel before ramping up the battery charge.
The meter heading number 4 in the user section displays various voltage
and amperage readings.
To access the meters:
• Scroll the menu using the Menu Headings buttons until meters
heading number "4" displays on the screen.
• Use the Menu Items buttons to view the available meters.
NOTE: The meters do not display a (+) symbol for positive values.
Explanation of the Meters
Inverter/Charger:
Amps AC - Displays the total number of AC amps used by the
internal charger when hooked to shore power or operating from
the inverter. This meter also displays the AC amp load when using
the inverter.
Input Amps AC - Combined total of AC amps including the
internal charger and pass through relay amps.
Load Amps AC - Displays the total number of AC amps of the
pass through relay.
Battery Actual Volts DC - Displays the DC battery voltage at the
inverter when hooked to shore power or operating the generator.
N A V I G A T O R 2 0 0 3