Hydraulic Filter - Holiday Navigator 2003 Owner's Manual

The Interceptor series hydraulic filter system, located in the engine
compartment, has special features to protect the precision tolerance hydraulic
components. The filter head assembly has a built in sight gauge that indicates
fluid flow through the filter. A specially designed media filter absorbs harmful
contaminants such as moisture and dirt. When the engine is running, use the
sight gauge to check the filtering process. The green zone indicates the
hydraulic fluid is being properly filtered and flowing unrestricted through the
filter and head assembly back to the reservoir. As the filter traps harmful debris
and contaminants, the indicator will move into the red zone. When the
indicator is in the red zone, it is indicating filter is clogged and fluid is bypassing
the element returning to the reservoir. The filter head is equipped with a built
in bypass valve. This prevents a clogged filter from developing a leak due to
excess hydraulic fluid pressure inside a clogged filter.
The filter is rated at ten micron*. Change the filter before the built in sight
gauge is operating in the red zone. This will ensure the hydraulic fluid is
properly filtered.
Filter number: Parker IN HC 5720 (ten micron)
*One micron is one millionth of one meter.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Change the filter if the indicator is in the red
zone with the engine running.
N A V I G A T O R 2 0 0 3
Chassis Information

Hydraulic Filter

090393
1 0 • 4 4 7