Holiday Navigator 2003 Owner's Manual page 227

To Play a DVD:
• Turn on the TV and select Video 1 using the TV/Video button.
• Turn on the Video Selector Box and set TV 1 to DVD.
• Turn on the DVD. The green power light should display. Insert a
disc and push Play.
To Listen to the Home Theater Sound System:
The VCR will be the tuner for the TV when using the Sound System. The
DVD player is the amplifier which receives audio signals from the TV. The
volume on the TV must be turned up to supply an adequate audio signal to the
DVD player.
• Turn on the TV and select Video 1 using the TV/Video button.
• Turn on the desired component (Tape, DVD or Satellite Dish).
• Turn on the Video Selector Box. Select the correct input: Tape,
DVD or Satellite Dish.
• Turn on the DVD player. Press the Function button until Video 1
displays on the DVD. Some systems may operate on Video 2.
• If viewing the Satellite Dish, turn on the VCR. Press the Input
Select button on the VCR remote until L1 displays on the VCR.
Press the VTR/TV button on the VCR remote until VTR displays
on the VCR.
• Switch the Video Selector Box TV1 heading to SAT.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
N A V I G A T O R 2 0 0 3
Equipment
5 • 2 2 7