Table of Contents
Advertisement
2
2.1
Overview
This chapter provides important safety information needed for the proper operation
of the unit.
2.2
General safety precautions
General accepted safety precautions, in particular the applicable precautions
relating to the handling of live electrical equipment, must be followed when
operating the system. Failure to observe these safety precautions may result in
personal injury or damage to the product.
It is understood that safety rules within individual companies vary. If a conflict
exists between the material contained in these instructions and the rules of a
company using this system, the more stringent rules take precedence.
2.3
Intended use
The products of the GAGE-CHEK 2000 series are advanced digital evaluation
electronics for the measurement of exact measured values and for positioning
tasks in metrology applications. The products are used primarily on measuring
machines, and positioning equipment.
The products of this series
must only be used in commercial applications and in an industrial environment
must be mounted on a suitable stand or holder to ensure the correct and
intended operation of the product
are intended for indoor use in an environment in which the contamination
caused by humidity, dirt, oil and lubricants complies with the requirements of
the specifications
22
The products support the use of peripheral devices from different
manufacturers. HEIDENHAIN cannot make any statements on the
intended use of these devices. The information on their intended use,
which is provided in the respective documentation, must be observed.
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018
Safety | Overview
Advertisement
Table of Contents
