Capturing The Minimum, Maximum, And Range - HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual

9
9.2.5

Capturing the minimum, maximum, and range

Prerequisite:
Further information:
Figure 27: Measure menu with active MinMax function
Minimum, maximum, and range
1
2 Function element when the
You can activate the MinMax function during the measurement in order to
determine the following values:
Minimum: lowest value
Maximum: highest value
Range: difference between the highest and the lowest value
144
The MinMax function is configured
"Configuring the MinMax function", Page 126
MinMax
The individual configuration determines which value are captured and
shown in the position display
Tap Measure in the main menu
Select a preset where necessary
Tap MinMax in order to start capturing
The function element turns green to show that the MinMax
function is active
The position display shows the minimum, maximum, and
range for each axis (depending on the configuration)
Conducting a measurement
Tap the green MinMax function element to interrupt capturing
The MinMax is paused and the icon turns gray
Tap the gray MinMax function element in order to continue
capturing
In order to conclude capturing, drag MinMax to the right
Tap Stop
The MinMax function is deactivated
The position display shows the current position of each axis
You can send the measured values to a computer
Measuring | Conducting a measurement
1
function is active
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018
2