Selecting A Preset - HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual

9
Starting the reference mark search manually
If the reference mark search was not performed on startup, you can start it
manually later.
9.2.2

Selecting a preset

The following options are available for defining the preset of a measurement:
Activate an existing preset from the preset table
Set a position as a preset by zeroing the axis or entering a position value
Activating the preset
Requirement:
The Presets function element is available in the Inspector
Further information:
The preset table contains presets
Further information:
140
A manual reference mark search can be performed only by the Setup
and OEM user types.
Tap Settings in the main menu
Open in the sequence
Axes
General settings
Reference marks
Tap Start
The existing reference marks are cleared
The display color of the axis position changes from white to
red
Follow the instructions of the wizard
On successful completion of the reference mark search, the
display color of the axis position changes from red to white
"Adding function elements", Page 123
"Creating a preset table", Page 124
Tap Measure in the main menu
Tap Presets
The Presets dialog box opens
Tap the desired preset
Tap Confirm
The preset is set
The selected preset is displayed in the function element
Measuring | Conducting a measurement
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018