Accessories - HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual

Transport and storage | Items supplied and accessories
3.3.2

Accessories

Software options need to be enabled on the product via a license key.
Before you can use the associated hardware components, you need to
enable the respective software option.
Further information:
The following accessories are optionally available and can be ordered from
HEIDENHAIN:
Acces- Name
sories
For operation
GAGE-CHEK 2000 AEI1
software option
GAGE-CHEK 2000 AEI1
Trial software option
For installation
Foot switch
KT 130 edge finder
Power cable
RS-232 connecting cable
Adapter cable for touch-
probe connection, DIN 5-
pin female
Adapter connector 11
µApp
Adapter connector 1 Vpp
TS 248 touch probe
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018
"Activating the Software options", Page 78
Description
Enabling of an additional
encoder input
Enabling of an additional
encoder input, test version
for a limited time (60 days)
Foot switch for external
operation with two freely
assignable keys; cable
length 2.4 m
Touch probe for probing
a workpiece (for setting
presets)
Power cable with European
plug (type F), length: 3 m
RS-232 connecting cable,
complete with two 9-pin D-
sub connectors (female)
Conversion of the pin layout
from HEIDENHAIN touch
probe interface to Renishaw
touch probe interface
Conversion of the 11 µA
interface from installa-
tion in D-sub connector,
2-row, female, 9-pin to D-
sub connector, 2-row, with
locking screws, male, 15-pin
Conversion of the 1 V
interface from installa-
tion in D-sub connector,
2-row, male, 15-pin to D-
sub connector, 2-row, with
locking screws, male, 15-pin
Touch probe for probing
a workpiece (for setting
presets), axial cable outlet
ID
1089226-01
1089226-51
681041-04
283273-xx
223775-01
366964-xx
1095709-xx
1089213-01
PP
1089214-01
PP
683110-xx
3
29