HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual page 77

Commissioning | Steps for commissioning
Setting the units of measure
You can set various parameters to define the units of measure, rounding methods
and decimal places.
Further information:
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018
Tap Settings in the main menu
Tap General
Tap Units
To set a unit of measure, tap the corresponding drop-down
list and select the unit
To set the rounding method, tap the corresponding drop-
down list and select the rounding method
To set the number of decimal places displayed, tap – or +
"Units", Page 163
7
77