Measuring | Conducting a measurement
Further information:
The last measured values remain in the product's buffer memory and
can be transferred via measured value output, until you capture new
measured values with the MinMax function.
9.2.6
Sending measured values to a computer
Use the functions for Measured value output to transfer measured values to a
computer manually or automatically.
Prerequisite:
Measured value output must be configured
Further information:
Sending measured values manually
Activating touch-probe triggered output of measured values
Activating continuous output of measured values
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018
"Sending measured values to a computer", Page 145
"Configuring the measured value output", Page 127
Conduct a measurement
Tap Manual measured value output
The measured values are sent to the computer once
Tap Touch-probe triggered output of measured values
The green symbol shows that the function is active
Conduct a measurement
The measured values are sent to the computer each time the
stylus deflects
In order to deactivate the function, tap the Touch-probe
triggered output of measured values function element
again
Tap Continuous output of measured values
The green symbol shows that the function is active
Conduct a measurement
The measured values are sent to the computer at a periodic
interval
In order to deactivate the function, tap the Continuous
output of measured values function element again
9
145