HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual page 134

8
Selecting contents for the data transfer
When configuring the function element you select which contents are to be
transferred to the computer.
Figure 24: Representation of selected contents for Measured value output
Further information:
134
Drag the function element to the left in the workspace
A dialog box for selecting the contents appears
Tap the desired contents to select them
The function element shows which contents are selected for
data transfer; selected contents are highlighted green
Tap Close
The selection is saved
Ensure that the MinMax function covers all measured values that you
want to send to a computer as part of the measured value output. If
measured values are missing then the value 0 is sent.
"Configuring the MinMax function", Page 126
Setup | Single steps for setup
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018