HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual page 98

7
Data schema in extended .txt format
The .txt file contains the deviations of the supporting points (in X and Y) from their
nominal values and must be constructed according to the following schema:
NLEC Data File (required text)
0.91 (required text)
// Serial Number = xx-xxxx-xxxx-xxxx (comment, optional)
mm (unit of measure)
ON (required text)
Number of Grid Points (x, y): (required text)
x
(number of supporting points on the X
axis)
Grid Block Size (x, y): (required text)
x.x
(spacing of supporting points on the Y
axis)
Offset: (required text)
0
Station (x1, y1) (required text)
x.xxxx
(deviation of the first supporting point
on the X axis)
Station (x2, y1) (required text)
x.xxxx
(deviation of the second supporting
point on the X axis)
...
98
Commissioning | Steps for commissioning
x
(number of supporting points on the Y
axis)
x.x
(spacing of supporting points on the X
axis)
0
x.xxxx
(deviation of the first supporting point
on the Y axis)
x.xxxx
(deviation of the second supporting
point on the Y axis)
...
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018