HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual page 118

8
Further information:
Adding a network printer
Requirement:
Further information:
Further information:
118
Tap Set standard values
Tap Resolution to set the printer resolution
Select the desired resolution
Tap Resolution once again
Tap Paper size to set the paper size
Select the desired paper size
Depending on the type of printer, select further values such
as type of paper or duplex print
Tap Properties
The entered values are saved as defaults
The printer is added and can be used
Use the CUPS web interface to configure the enhanced settings of the
connected printer. You can also use this web interface if the printer
information fails over the product.
Further information: "Using CUPS", Page 121
"Printers", Page 160
A network printer or network is connected to the product.
"Connecting a printer", Page 47
"Connecting a network peripheral", Page 48
Tap Settings in the main menu
Tap General
Tap Printers
Open in the sequence
Add printer
Network printer
Printers available on the network are detected automatically
Setup | Single steps for setup
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018