Wizard - HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual

Basic operation | Messages and audio feedback
Closing messages
Depending on the content of the messages, you can close messages by means of
the following operating elements:
6.12.2

Wizard

Figure 17: Display of messages in the wizards
1 Wizard (example)
The wizard assists you in performing work steps or teach-in processes, and in
executing programs.
You can move the wizard in the workspace .
The following operating elements provided by the wizard depend on the work step
or process:
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018
To close an informational message, tap Close
The message disappears
or
To close a message that potentially has an effect on the
application, tap OK
If applicable, the message will now be taken into account by
the application
The message disappears
To return to the last work step or repeat the process, tap
Undo
To confirm the displayed work step, tap Confirm
The wizard proceeds to the next step or concludes the
process
Tap Close to close the wizard
1
6
71