HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual page 179

Settings | Axes
Parameter
Incremental signal
Encoder model
Signal period
Line count
Mechanical ratio
Reference marks
Analog filter frequency
Terminating resistor
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018
Explanation
Signal of the connected encoder
Settings:
1 Vpp: Sinusoidal voltage signal
11 µApp: Sinusoidal current signal
Default value: 1 Vpp
Connected encoder model
Settings:
Linear encoder: Linear axis
Angle encoder: Rotary axis
Angle encoder as linear encoder: Rotary axis is displayed as
linear axis
Default value: Depending on the connected encoder
For linear encoders
Length of a signal period
Setting range: 0.001 µm ... 1000000.000 µm
Default value: 20.000
For angle encoders and for display of a rotary axis as a linear
axis.
Number of lines
Setting range: 1 ... 1000000
Default value: 1000
For display of a rotary axis as a linear axis:
traverse path in mm per revolution
Setting range: 0.1 mm ... 1000 mm
Default value: 1.0
Configuration of the Reference marks
"Reference marks (Encoder)", Page 182
Further information:
Frequency value of the analog low-pass filter
Settings:
33 kHz: Suppression of interference frequencies above
33 kHz
400 kHz: Suppression of interference frequencies above
400 kHz
Default value: 400 kHz
Dummy load to avoid reflections
Settings: ON or OFF
Default value: ON
11
179