Configuring The Measured Value Output - HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual

Setup | Single steps for setup
Selecting measured values
Ensure that the MinMax function covers all measured values that you
want to send to a computer as part of the measured value output. If
measured values are missing then the value 0 is sent.
8.3.5

Configuring the measured value output

The product offers you various functions for manual or automatic transfer of the
captured measured values to a computer.
Prerequisites:
The product must be connected to the computer via an RS-232 adapter
Receiving software is installed on the computer, such as a terminal program
The following steps are necessary in order to configure the measured value
output:
Configuring an interface
Selecting a data format
Adding the desired function elements to the Inspector
Selecting contents for the data transfer
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018
Drag the MinMax function element to the left in the
workspace
A dialog box for selecting the measured values appears
Tap the desired measured values to select them
Tap Close
The selection is saved
If you activate the MinMax function, the selected measured
values will be captured and shown in the position display
8
127