HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual page 96

7
Example:
The example shows a grid with 5 x 5 supporting points with spacing of 25 mm on
the X axis and 20 mm on the Y axis, oriented on the X axis.
Figure 18: Example of calibration data in .acf format
Measuring the table of supporting points in .txt format
You can generate the import file for the table of supporting points in .txt format:
Open a new file in the text editor of your computer
Save the file under a unique name and the file extension *.txt
Measure the data with tab stops separated according to the following schema
Data schema in .txt format
The .txt file contains the actual values of the supporting points (in X and Y) and
must be constructed according to the following schema:
Unit of measure
Spacing of supporting points on the X
axis
Number of supporting points on the X
axis
X value of the first supporting point
X value of the second supporting point
...
X value of the last supporting point
96
Select either X or Y as the directional axis.
Commissioning | Steps for commissioning
Directional axis
Spacing of supporting points on the Y
axis
Number of supporting points on the Y
axis
Y value of the first supporting point
Y value of the second supporting point
...
Y value of the last supporting point
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018