Table of Contents
Advertisement
Settings | Axes
11.6.2
Information
Settings ► Axes ► General settings ► Information
Path:
Parameters
Assignment of the encoder
inputs to the axes
Assignment of the analog
outputs to the axes
Assignment of the analog inputs
to the axes
Assignment of the digital outputs
to the axes
Assignment of the digital inputs
to the axes
With the Reset buttons, the assignments for the inputs and outputs can
be reset.
Error compensation
11.6.3
Settings ► Axes ► General settings ► Error compensation
Path:
Parameter
Nonlinear error compensation
(NLEC)
Squareness error compensation
(SEC)
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018
Explanation
Shows the assignment of the encoder inputs to the axes
Shows the assignment of the analog outputs to the axes
Shows the assignment of the analog inputs to the axes
Shows the assignment of the digital outputs to the axes
Shows the assignment of the digital inputs to the axes
Explanation
Mechanical influences on the axes of the machine are compen-
sated
Mechanical influences on the squareness of the axes relative to
each other are compensated
11
175
Advertisement
Table of Contents
