Configuring No-Prompt Mode - Lenovo CN4093 Application Manual

10gb converged scalable switch

Hide thumbs Also See for CN4093:

Table of Contents

Configuring No-Prompt Mode

CN4093 Application Guide for N/OS 8.3

If you expect to administer the switch using SNSC or another browser-based

interface, you need to turn off confirmation prompts. When CLI confirmation

prompts are disabled, the switch will choose the default answer. To accomplish

this, use one of the following commands:

CN 4093(config)# [no] prompting

Note: This command will disable CLI confirmation prompts for current and future

CN 4093(config)# [no] terminal dont-ask

Note: This command will disable CLI confirmation prompts for the current

session only. It also takes precedence over the prompting command - any settings

configured through the prompting command will be disregarded for the

duration of the current session.

For more details, see the Lenovo Flex System CN4093 10Gb Converged Scalable Switch

Command Reference for Lenovo N/OS 8.3.