Download Print this page

Lenovo ThinkSystem NE1032 Quick Start Manual

For lenovo cloud network operating system
Hide thumbs

Advertisement

Lenovo ThinkSystem NE1032 RackSwitch
ONIE Quick Start Guide
for Lenovo Cloud Network Operating System

Advertisement

loading

  Related Manuals for Lenovo ThinkSystem NE1032

  Summary of Contents for Lenovo ThinkSystem NE1032

  • Page 1 Lenovo ThinkSystem NE1032 RackSwitch ONIE Quick Start Guide for Lenovo Cloud Network Operating System...
  • Page 2 LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925. Lenovo and the Lenovo logo are trademarks of Lenovo in the United States, other countries, or both.
  • Page 3: Table Of Contents

    The Boot Management Menu ..... . Uninstalling the Lenovo Network OS ....
  • Page 4 Lenovo ONIE Quick Start Guide for NE1032...
  • Page 5: Overview

    Free Software Foundation. To read the license, visit the following link: https://github.com/opencomputeproject/onie/blob/master/COPYING For more details about ONIE, go to onie.org. Lenovo ONIE Image To download the Lenovo ONIE image, visit the following website: http://support.lenovo.com/ The ONIE images for the NE1032 have the [ONIE] tag in their name, as follows: ...
  • Page 6: Connecting To The Ne1032

    Connecting to the NE1032 This section describes how to connect to the Lenovo ThinkSystem NE1032 RackSwitch. For more details about the switch and on how to install the switch hardware, consult the Lenovo ThinkSystem NE1032 RackSwitch Installation Guide. Switch Unit The NE1032 is a 1U GbE switch and it can be rack-mounted in a horizontal position.
  • Page 7: Mini-Usb Serial Console Port

    HyperTerminal, or PuTTY). The console port terminal emulation requirements are as follows: • Default baud rate: 9,600 bps • Character size: 8 characters • Parity: none • Stop bits: 1 • Data bits: 8 • Flow control: none © Copyright Lenovo 2017 Connecting to the NE1032...
  • Page 8: Geographic Layout Of The Temperature Sensors

    T1042 I2C Bus 2 U36 - MAC I2C @ 1001-010X on CH3 of PCA9548 T1042 I2C Bus 2 U39 - Front of the Card I2C @ 1001-110X on CH3 of PCA9548 T1042 I2C Bus 2 Lenovo ONIE Quick Start Guide for NE1032...
  • Page 9 Figure 5. NE1032 CPU Board Temperature Sensors © Copyright Lenovo 2017 Connecting to the NE1032...
  • Page 10 Figure 6. NE1032 Main Board Temperature Sensors 3.58 Lenovo ONIE Quick Start Guide for NE1032...
  • Page 11: Onie On The Ne1032

    ONIE on the NE1032 The Lenovo ThinkSystem NE1032 RackSwitch comes out of the box with Lenovo Cloud Network OS (CNOS) already installed on the switch. To ensure maximum security, ONIE is not available on the switch by default. To enable the running of ONIE on the switch, you must follow these steps: 1.
  • Page 12: Installing The Onie Fod License Key

    Demand (FoD) license key. The process of obtaining and installing a FoD license key is described in the following pages. Obtaining the ONIE License Key The ONIE license key or activation key can be acquired using the Lenovo Features on Demand (FoD) website: http://fod.lenovo.com/lkms/ You can also use the website to review and manage the license, and to obtain additional help if required.
  • Page 13: Installing The Onie License Key On Cnos

    To remove the ONIE license key from the switch, use the following command: NE1032(config)# no license install <license file> For example: NE1032(config)# no license install fodEE3 Note: When removing the ONIE license key from the switch, the ONIE software image is also removed. © Copyright Lenovo 2017 ONIE on the NE1032...
  • Page 14: Installing Onie

    ONIE license key is not installed. 1. Download an ONIE image for the switch from the following link: http://support.lenovo.com/ For CNOS, the ONIE image is called Lenovo ThinkSystem NE1032 RackSwitch [ONIE] v10.x.x.0. 2. Upload the ONIE image to a local server or a USB drive.
  • Page 15 Currently set to boot software active image Currently scheduled reboot time: none Current port mode: default mode In the command output, the current ONIE image installed on the switch is displayed under the Current FLASH software section. © Copyright Lenovo 2017 ONIE on the NE1032...
  • Page 16: Booting In Onie Mode

    The user can, at any point, reboot and run the ONIE installer again to install another Network OS. The Lenovo ONIE installer image, which installs the different Lenovo Network Operating Systems, is called onie-installer-powerpc-lenovo_ne1032-r0, and it is available at the following link: http://support.lenovo.com/...
  • Page 17: Booting In Onie Uninstall Mode

    Are you sure you want the next boot to uninstall the OS? (y/n) Once you confirm, the switch boots in ONIE uninstall mode on the next reload. For more details, see “Uninstalling the Lenovo Network OS” on page © Copyright Lenovo 2017 ONIE on the NE1032...
  • Page 18: Booting In Onie Update Mode

    Note: Upon reloading after the update process is completed, the switch is not able to load the Lenovo Network OS, booting into ONIE Install mode instead. To access the console port at this point, you must change the default baud rate of the terminal emulator to 115,200 bps.
  • Page 19: The Boot Management Menu

    “Booting in ONIE Uninstall Mode” on page To boot the switch using the installed NOS image, press N.  To exit the ONIE submenu and return to the Boot Management Menu, press E.  © Copyright Lenovo 2017 ONIE on the NE1032...
  • Page 20: Uninstalling The Lenovo Network Os

    Uninstalling the Lenovo Network OS If you wish to run another network operating system (NOS), you can uninstall the Lenovo Network OS by using the ONIE Uninstall mode. For more details, see “Booting in ONIE Uninstall Mode” on page Notes: ...
  • Page 21: Using Onie Without Lenovo Network Os

    Using ONIE without Lenovo Network OS If you remove the Lenovo Network OS from the switch by using ONIE Uninstall mode, we recommend that you consult the official documentation from the ONIE website: https://github.com/opencomputeproject/onie/wiki/Quick-Start-Guide If you run into trouble with an ONIE-based installation, follow the suggestions from the ONIE website: https://github.com/opencomputeproject/onie/wiki/Quick-Start-Guide#...
  • Page 22 Lenovo ONIE Quick Start Guide for NE1032...

This manual is also suitable for:

Thinksystem ne1032t rackswitch